LVT vinyl wallcoverings with slats/plates
• Pure and transparent PVC coating layer 0,07 mm
• Pure and transparent PVC coating layer 0,10mm (printed with innovative techniques)
• PVC support layer 1,63 mm.
The components are assembled together on hot non-continuous press.
The laying surface should be flat, smooth, dry, consistent, free from grease and cracks and to maintain these characteristics over time. During installation, the ambient temperature must be at least + 18°C and this temperature must be maintained for at least 2 days after completion of the work. The laying is performed by bonding to plain coating using suitable adhesives according to the manufacturer's instructions. The maximum permissible residual moisture content of the substrate is ≤ 2%. Condensate the material for at least 48 hours inside the premises where it is to be laid. Suitable LVT vinyl wallcovering adhesives should be used on suitable substrates. When laying in damp environments, it is imperative to use water-resistant lacquers, adhesives and protective finishes.
Cleaning and maintenance instructions
The coating can be used after 48h after the laying time. It is wiped with damp cloth. Only use neutral detergents. After years of use, if necessary, reset the surface with a waterproof protective coating.
The images shown are for illustrative purposes only and may differ from the actual product.